- Energy Meter Field Calibrator
-
Transformer Test Equipment
- Transformer Test Bench
- Turns Ratio Tester
- DC Resistance Tester
- Transformer Tan Delta Tester
- Sweep Frequency Response Analyzer
- Partial Discharge Tester
- CT PT Analyzer
- Transformer On-Load Tap-Changer Tester
- Short-Circuit Impedance And No-load Integrated Tester
- Winding Resistance And Turns Ratio Integrated Tester
- Transformer Capacitance And Inductance Tester
- Transformer Capacity And Characteristic Tester
- Lightning Arrester Tester
- Short-Circuit Impedance Tester
- Transformer Oil Test Equipment
- SF6 Gas Analyzer
- Secondary Injection Relay Test Set
- Resistance Tester
- Power Quality Analyzer
- HV Switch Tester
- High Voltage Test Equipment
- Cable Fault Locator
- Battery Tester
0102030405
Huazheng Manufacture HZBS-X3 Closed Cup Flash Point Tester
I.Instrument Features
This instrument uses a touch screen to replace traditional keyboard operations, making it convenient for measuring the flash point values of petroleum products. It features advanced technology, including a full English display on an LCD screen, a user-friendly touch-key interface, and an open-beam, fuzzy control integrated software with a modular structure.
Key Features:
1.Modular Design: The standard modular design allows one main unit to control multiple open or closed test furnaces. Test furnaces can be freely exchanged according to user needs, significantly improving efficiency and economic benefits.
2.High-Precision Components: Controlled by a high-speed signal processor and equipped with a high-precision analog/digital converter circuit, the instrument offers reliable and precise measurements.
3.Automated Functions:
a.Auto-ignition.
b.Automatic measurement and correction of atmospheric pressure.
c.Adaptive PID control algorithm to adjust temperature according to standard curves.
d..Fully automated experiment process, including detection, cover opening, ignition, alarm, cooling, and printing.
e..Automatic detection stop and alarm when the temperature is out of range.
4.Printing and Data Management:
a.Thermal micro-printer for efficient and aesthetically pleasing printing, with offline printing capability.
b.History records with timestamps (up to 256 entries).
5.Display and Interface:
a.Large 320x240 graphical LCD screen with rich, full-character display.
b.Touch screen operation with a user-friendly interface and screen saver function to extend LCD life.
c.RS232 interface for printer or PC data downloads.
II.Technical Parameters
1.Temperature Measurement
• Temperature measuring range: -59.9°C～199.9°C
• Temperature Control Range: Room temperature～200°C
• Repeatability: 0.025X(x=twice successive test average value)
• Resolution: 0.1°C
• Precision: 0.5%
• Temperature Sensor: Platinum Resistor(PT100)
• Flash Fire Sensor: Ion detection ring
2.Ambient Temperature: 0 ~ 40°C
3.Relative Humidity: ≤ 85% RH
4.Power Supply: AC220V ± 20% ; 50HZ ± 10%
5.Power Consumption: approx 400W
6.Overall Dimension: 440X280X290(mm)
7.Instrument Weight: 14kg
Instrument Structure And Installation
1)Instrument Installation
A.Unpack the instrument and make sure that the equipment is in good condition.
B.Check instrument model and all accessories according to the packing list.
C.Please debug the instrument after inspection step 1 & 2
2)Starting-up Preparation
A.Insert the furnace plug into AC220V three-wire power socket, and the socket should be based on clear and reliable grounding
B.Connect the test furnace and main engine with dedicated instruments dedicated cable
C.Clean the oil cup with petroleum ether, pour sample liquid into the oil cup to the scale mark, and put into the heater
D.Correctly install the oil lamp and platinum alloy electric ignition wire ignition head
Precautions and Instrument Maintenance
1)The instrument should be used in a non-corrosive environment.
2)The oil cup should be cleaned, when replacing test sample.
3)Check thermocouple should not have oil contamination, or it will affect the detection sensitivity.
4)No touch ignition head, oil cup and its surrounding parts to avoid scorching during the test.
Failure and Treatment
|
NO. |
Failure |
Treatment |
|
1 |
Turn on the power,the LCD screen no display | Check power supply is plugged in, open the instrument measured the board examine the plug is not loose. |
|
2 |
Large repeatability error for sample testing | Remove the lifting arm top cover, and check 1. whether the mixer shaft is broken 2.Oil may effect on thermocouple sensitivity, plz dry it by filter paper |
|
3 |
No heating | Electric wire broken |
|
4 |
Lift arm rise or fall failure | Limit optocoupler damage The screw between main engine and lift arm fell off |
X.Packing List
|
No. |
Item |
Qty |
|
1 |
Main engine |
1 |
|
2 |
Power line |
1 |
|
3 |
The test cup |
1 |
|
4 |
Fuse pipe |
2 |
|
5 |
Touch pen |
1 |
|
6 |
Print Paper |
1 |
TO KNOW MORE ABOUT Huazheng, PLEASE CONTACT US！
Our experts will solve them in no time.