- Energy Meter Field Calibrator
-
Transformer Test Equipment
- Transformer Test Bench
- Turns Ratio Tester
- DC Resistance Tester
- Transformer Tan Delta Tester
- Sweep Frequency Response Analyzer
- Partial Discharge Tester
- CT PT Analyzer
- Transformer On-Load Tap-Changer Tester
- Short-Circuit Impedance And No-load Integrated Tester
- Winding Resistance And Turns Ratio Integrated Tester
- Transformer Capacitance And Inductance Tester
- Transformer Capacity And Characteristic Tester
- Lightning Arrester Tester
- Short-Circuit Impedance Tester
- Transformer Oil Test Equipment
- SF6 Gas Analyzer
- Secondary Injection Relay Test Set
- Resistance Tester
- Power Quality Analyzer
- HV Switch Tester
- High Voltage Test Equipment
- Cable Fault Locator
- Battery Tester
0102030405
Huazheng HZJB-II Secondary Injection Relay Test Set
I. Main Features
1.Output a full isolation way for adjustable DC voltage, Automatic protection for short circuit, overload and out range.
2.Maximum Output Current:0~150A.
3.Equipped with LCD digital AC/DC volt-ampere meter, can show the AC and DC voltage and current values, stopwatch, potential, contact state.
4.Internal electric stopwatch; Available electrical contacts, maximum potential 250V; Dual channel measurement.
5.Light-weight design, small-volume, and fully-functional
II.Main Technical Parameter And Functions
1.Rated input power: AC:220V±10%·1000VA·50Hz
2.AC Output
|
Range(A) |
No-load Voltage (Minimum)V |
Full-load Voltage (Minimum)V |
Full-load Current (Maximum)A |
|
0~10 |
90 |
80 |
10 |
|
0~40 |
25 |
22 |
40 |
|
0~100 |
10 |
＜8 |
150 |
|
Range(V) |
No-load Voltage (Minimum)V |
Full-load Voltage (Minimum)V |
Full-load Current (Maximum)A |
|
0~250(AC) |
250 |
240 |
3 |
|
0~300(DC) |
320 |
250 |
3 |
3.DC auxiliary Output
|
Range V |
Voltage V |
Maximum current A |
|
0~110 |
120 |
0.5 |
|
110~220 |
220 |
0.5 |
4.Stopwatch:
Range: 0.0000~999999S,Resolution: 0.1mS,
Accuracy: ±5
With electrical contacts and potential input, the maximum input voltage: DC 250V
5.Ammeter:
Range: internal: 0.000~150.0A;
External: 0.000~6.000A(AC or DC)
Accuracy: 0.5%, Measurement methods: AC: True RMS value DC: Average
6.Voltmeter:
Range: 0.0~600.0V(AC OR DC);
Accuracy: 0.5%, Measurement methods: AC: True RMS value DC: Average
7.Resistors and Capacitors:
Resistance: 0.5 ohm to 2.5k ohm
Capacitor: 10uF, maximum voltage AC 450V
8.Division / combination of auxiliary contacts
Maximum current: 1A, Maximum voltage: AC250V or DC120V
9.Using Environment: Temperature: -10 ~ 40 ℃,
Relative humidity must less than 80%
10.Volume: 320mm×260mm×230mm
11. Weight: 16kg
III.Caution:
1.The device should be reliably grounded during operation to ensure safety.
2.If the display appears too dark or black, please adjust the "contrast" setting.
3.The "measuring selection" button will be inactive once the current is being output.
TO KNOW MORE ABOUT Huazheng, PLEASE CONTACT US！
Our experts will solve them in no time.