- Energy Meter Field Calibrator
-
Transformer Test Equipment
- Transformer Test Bench
- Turns Ratio Tester
- DC Resistance Tester
- Transformer Tan Delta Tester
- Sweep Frequency Response Analyzer
- Partial Discharge Tester
- CT PT Analyzer
- Transformer On-Load Tap-Changer Tester
- Short-Circuit Impedance And No-load Integrated Tester
- Winding Resistance And Turns Ratio Integrated Tester
- Transformer Capacitance And Inductance Tester
- Transformer Capacity And Characteristic Tester
- Lightning Arrester Tester
- Short-Circuit Impedance Tester
- Transformer Oil Test Equipment
- SF6 Gas Analyzer
- Secondary Injection Relay Test Set
- Resistance Tester
- Power Quality Analyzer
- HV Switch Tester
- High Voltage Test Equipment
- Cable Fault Locator
- Battery Tester
Huazheng Factory HZ-5200 Contact Resistance Meter 200A Loop Resistance Tester
I. Introduction
The HZ-5200 is widely used for testing the contact resistance of various switches and electrical appliances, as well as the contact resistance of power cables and welding seams.The measurement data is accurate and reliable, with high stability, meeting the requirements of power supply departments for on-site high-voltage switch repairs and high-voltage switch factory contact resistance testing. The output current and measured resistance are displayed simultaneously on the 7-inch high-brightness touchscreen color LCD. Measurement results can be stored on a USB drive, with power-off storage functionality to ensure data can be queried at any time.
Headline:4× faster testing, auto power-off on wiring errors, and continuously adjustable current from 50 to 200 A — a new standard for micro-ohm loop resistance testing.
1. Wiring-Error Self-Protection— Real-time connection monitoring: abnormal wiring triggers an alarm screen and automatically cuts off output, protecting both instrument and test object from damage.
2. Up to 4× Faster— Test result in 1–2 seconds (was ~8 s); finish far more measurement points within every maintenance outage window.
3. Flexible Current Control— Quick 50/100/150/200 A presets plus continuous 50–200 A adjustment in 1 A steps; match the exact test current for different standards and test objects.
4. 10× Storage— Up to 9,999 records keep full traceability for reporting and audit.
5. New RS485 Interface— Adds industrial networking to RS232/Bluetooth/USB for automated data collection and remote management.
6. 6-Language UI— Chinese, English, French, Russian, Spanish, Portuguese — lower on-site training cost worldwide.
II.Specification
This manual applies to the HZ-5200 loop resistance tester.
This instrument is designed for the accurate measurement of contact resistance at circuit breaker contacts, busbar joints, contact elements in busbars, cable joints, and other high-current connections.
When contact resistance increases abnormally due to oxidation, loose threads, insufficient clamping force, or long-term aging, abnormal heat will be generated at the contact point when current flows. This heat will further accelerate oxidation and mechanical relaxation, leading to a decrease in conductivity and forming a vicious cycle of "heating → increased resistance → more severe heat generation," which may ultimately cause equipment failure or even burnout.
The HZ-5200 loop resistance tester employs a high-current constant current source and Kelvin four-wire measurement method to quickly and accurately measure contact resistance at the micro-ohm level, helping users detect potential problems before they escalate to an uncontrollable stage. Regularly using this instrument to check contact resistance can effectively assess the health of electrical connections, providing a reliable basis for preventative equipment maintenance.
1.1 Performance Characteristics
1. The instrument can be controlled entirely via a mobile phone using dedicated software. Test data is stored on the phone in a fixed format for easy data retrieval at any time.
2. Multiple protection functions are included during testing, such as protection against wire breakage, power failure, and power overheating.
3. Intelligent power management technology ensures the instrument always operates at minimum power, effectively saving energy and reducing heat generation.
4. High output voltage and wide measurement range.
5. The test current comes from a high-precision, high-current constant power supply, requiring no manual adjustment, and the test is fast and accurate.
6. The four-terminal wiring method effectively eliminates the influence of the test lead resistance on the test results.
7. Seven-inch high-brightness touchscreen color LCD, clear display even in strong light, full touchscreen operation, and free switching between multiple languages .
8. The instrument has a built-in perpetual calendar clock and power-off memory, which can store 9999 sets of test data for easy access at any time.
9. The instrument has Bluetooth communication, RS232 communication , RS485 communication and USB interface for computer communication and USB flash drive data storage.
10. Comes with a panel-mounted mini printer that can print measurement results in Chinese.
III.Technical Index
Test current: 5-200A
Measuring range: 0～100mΩ (50A) 0～50mΩ (100A)
0～ 20mΩ （ 150A ） 0～ 20mΩ （ 200A ）
Resolution : Minimum 0.01µΩ
Accuracy: ± (0.5% ± 0.2 µΩ)
Power: 1000W
Operating mode: Continuous measurement
Operating power supply: AC220V±10% 50HZ
Operating temperature: -20 ～ 50 ℃
Relative humidity: less than or equal to 90%, no condensation.
External dimensions: 360*290*170 (mm)
Weight: Main unit 6.4 KG, cable box 9 KG
V.Guarantee And After Sales Service
Packing List
|
No. |
Item |
Qty |
|
1 |
Main engine |
1 |
|
2 |
Red test line |
I |
|
3 |
Black test line |
1 |
|
4 |
Power line |
1 |
|
5 |
Ground lead |
1 |
|
6 |
Fuse pipe |
2 |
|
7 |
Print paper |
1 |
|
8 |
Test sample（Standard resistance） |
1 |
|
9 |
Serial port line |
1 |
TO KNOW MORE ABOUT Huazheng, PLEASE CONTACT US！
Our experts will solve them in no time.