Products Categories

Huazheng Factory Manufacture HZ2374 400A Contact Resistance Tester

Huazheng HZ1151 ASTM D5293 CCS Bath Cold Cranking Simulator Automatic Apparent Viscosity Tester

Huazheng OEM 5KV Portable High Voltage Insulation Resistance Tester

Huazheng Factory OEM HZ-3100A 100A Transformer Winding Resistance Tester

HZ-A40 Vehicle-Mounted Cable Fault Integrated Testing System Power Cable Locator Test Van

Huazheng OEM HZ5375 5000A Digital Primary Current Injection Tester Supplier

Huazheng Manufacture HZ5376 6000A Primary Current Injection Test Equipment

Huazheng Manufacture HZ5374 OEM 4000A Primary Current Injection Test Kit

Huazheng HZ2511 Factory Manufacture Impulse Withstand Generator

Huazheng HZKF-2 Trace Moisture Analyzer Oil Water Content Tester

0102030405

HuaZheng HZBS-3 CE Certification Automatic Insulating Oil Flash Point Tester

HZBS-3 Closed Cup Flash Point Tester, color touch screen instead of keyboard operation. Used to determine the closed flash point value of petroleum products. Adopt advanced foreign technology, convenient and fast, open, fuzzy control integrated software, modular structure. The instrument meets the ISO2719 standard, national standards, the United States and other standards. It is an ideal substitute for imported instruments. It is widely used in railway, aviation, electric power, petroleum industry and scientific research.

Main technical features and functions of HZBS-3 automatic closed flash point tester.

Main Functions And Features

1.The new high speed digital signal processor is adopted to work reliably and accurately.

2.Test, open cover, ignition, alarm, cooling, printing, the whole test process is completed automatically.

3.This instrument uses electric ignition;

4.Automatic measurement of atmospheric pressure and automatic correction of test results.

5.Using the newly developed high power high frequency switching power heating technology, the heating efficiency is high, and the adaptive PID control algorithm is adopted to automatically adjust the heating temperature curve.

6.Temperature overvalue automatically stops detection and alarm.

7.Thermal - sensitive micro-printer, makes printing more beautiful and faster, with offline printing function.

8.Historical test records with time markers are stored up to 50.

9.640x480 color touch screen, easy to operate.

10.Using full-screen touch screen keys, intuitive and convenient operation.

11.Built-in multiple execution standards to choose from.

Working Principle

The equipment under the conditions stipulated in the national standard, put the sample into test cup, affect the heating experiment of oil cup, with the oil vapor ambient air and gas with the lowest temperature will ignite a flame as a flash point. The digital signal processor controls the heater according to the temperature change, so that the test oil temperature rises at a certain rate. Automatic control of ignition and flash detection; When the flash is measured, the system stops data collection, displays the flash temperature, prints the recording results, and stops heating.

Main Technical Index

1.Temperature Measurement

Temperature measuring range: -49.9°C～400.0°C

Temperature control range: room temperature～250℃

Repeatability: 0.029X(x=twice successive test average value)

Resolution: 0.1°C

Precision: 0.5%

Temperature Sensor: Platinum Resistor(PT100)

Flash fire detection: K Thermocouple

2.Ambient Temperature: 10 ~ 40°C

Relative Humidity: ﹤ 85% RH

Power Supply: AC230V

Power Consumption: ﹤ 500 W

3.Heating rate: in line with national standards, the United States and other standards

4.Overall Dimension: 390X300X302(mm)

5.Instrument Weight: 15 kg

Instrument Structure And Installation

1)Instrument Installation

A.Unpack the instrument and make sure that the equipment is in good condition.

B.Check instrument model and all accessories according to the packing list.

C.Please debug the instrument after inspection step 1 & 2.

2)Starting-up Preparation

A.Connect the instrument to the AC 220V power supply;

Note: Always use a power outlet with a reliable ground to power the instrument;

B.Clean the oil cup with petroleum ether, pour sample liquid into the oil cup to the scale mark, and put into the heater.

Install the platinum alloy electric heating wire ignition head correctly.

Safety Instructions

1.Be sure to use a grounded outlet for the instrument’s power supply.

2.No touching the Oil Cups and its nearby parts during test, in case of scald.

3.There must be someone on duty during the test. Cover oil cup lid in time if the sample is burning after the test is completed.

4.No touch the oil lid because of high heat.

5.Do not touch the ignition rod by hands; otherwise it will cause permanent damage to the instrument!

TO KNOW MORE ABOUT Huazheng, PLEASE CONTACT US！

Our experts will solve them in no time.